Manganese Nanoparticles: Synthesis, Mechanisms of Influence on Plant Resistance to Stress, and Prospects for Application in Agricultural Chemistry.

Manganese (Mn) is an important microelement for the mineral nutrition of plants, but it is not effectively absorbed from the soil and mineral salts added thereto and can also be toxic in high concentrations. Mn nanoparticles (NPs) are less toxic, more effective, and economical than Mn salts due to their nanosize. This article critically reviews the current publications on Mn NPs, focusing on their effects on plant health, growth, and stress tolerance, and explaining possible mechanisms of their effects. This review also provides basic information and examples of chemical, physical, and ecological ("green") methods for the synthesis of Mn NPs. It has been shown that the protective effect of Mn NPs is associated with their antioxidant activity, activation of systemic acquired resistance (SAR), and pronounced antimicrobial activity against phytopathogens. In conclusion, Mn NPs are promising agents for agriculture, but their effects on gene expression and plant microbiome require further research.

Characterization and biodegradation of ternary blends of lignosulfonate/synthetic zeolite/polyvinylpyrrolidone for agricultural chemistry.

This study investigates novel ternary polymer blends based on polyvinylpyrrolidone (PVP) as the matrix in combination with lignosulfonate and synthetic zeolite. The blends were prepared by the casting method, and their properties were analysed by various techniques, i.e. FTIR analysis, differential scanning calorimetry and thermogravimetric analysis, including tests for water solubility and uptake, and determination of adhesion and hardness. The biodegradation of the blends in soil was also evaluated, and an experiment was conducted on plant growth (Sinapis alba). Optical microscopy showed that particles of the synthetic zeolite were relatively evenly distributed in the polymer matrix, forming random networks therein. The FTIR spectra for the blends proved that hydrogen bonding interactions had occurred between the PVP/synthetic zeolite and PVP/lignosulfonate. DSC analysis confirmed the good miscibility of the PVP and lignosulfonate. TGA results indicated that the thermal stability of the PVP was maintained. Lignosulfonate had the effect of reducing the adhesion of the blends. However, it was revealed that effect depends greatly on the presence of zeolite and the concentration of lignosulfonate. The obtained results showed that the optimal composition of the blend is 2.5 wt% of zeolite and 5 wt% of lignosulfonate into the PVP. Its water solubility and uptake was satisfactory from the perspective of handling and further utilization. A respirometric biodegradation test confirmed that the ternary blend was environmentally friendly, in addition to which a germination experiment evidenced that the lignosulfonate and synthetic zeolite promoted the root growth and development of S. alba. From these findings it was concluded that the novel ternary polymer blend was applicable as either as seed carriers (in the form of seed tapes) or as a biocompatible coating to protect seeds.

Fluorescence Probes for Reactive Sulfur Species in Agricultural Chemistry.

Sulfur is an element that is indispensable throughout the growth of plants. In plant cells, reactive sulfur species (RSS) play a vital role in maintaining cellular redox homeostasis and signal transduction. There is demand accordingly for a simple, highly selective, and sensitive method of RSS detection and imaging for monitoring dynamic changes and clarifying the biological functions of RSS in plant systems. Fluorescent analysis based on organic small-molecule fluorescent probes is an effective and specific approach to tracking plant RSS characteristics. This perspective summarizes the recent progress regarding organic small-molecule fluorescent probes for RSS monitoring, including small-molecule biological thiols, hydrogen sulfide, and sulfane sulfurs, in plants; it also discusses their response mechanism toward RSS and their imaging applications in plants across the agricultural chemistry field.

Current trends and challenges in the synthesis and applications of chitosan-based nanocomposites for plants: A review.

Chitosan, a low-cost and multipurpose polymer with numerous desired physicochemical and biological properties has been tested for various applications in agriculture, pharmacy, and biomedicine industries. The availability of functional groups along the backbone makes chitosan readily available for other polymers and metal ions to form bio-nanocomposites. Different types of chitosan-based nanocomposites have been designed and tested for the enhancement of chitosan efficiency and ultimately widening the application areas of chitosan in plants. These nanocomposites serve different purposes such as eliciting plant's defence systems against different threats (pathogen attack), antimicrobial agent against bacteria, fungi and viruses, enhancement of nutrient uptake by plants, control release of micro/macronutrients, fungicides and herbicides. In this review, an extensive outlook has been provided (mainly in the last five years) to recent trends and advances in the fabrication and application of chitosan-based composites. Finally, current challenges and future development opportunities of chitosan-based nanocomposites for plants are discussed.

Synthesis and characterization of diphenylamine grafted onto sodium alginate for metal removal.

A novel grafting polymer was synthesized via grafting of diphenylamine (DPA) onto sodium alginate (NaAlg) as a new adsorbent for Cobalt (Co2+) from aqueous solutions. Optimization of sodium alginate grafted by diphenylamine (NaAlg-g-DPA) was addressed in the current study by several parameters including; initiator and monomer concentrations, contact time of polymerization, as well as polymerization temperature. In addition, the structural and chemical characteristics of NaAlg-g-DPA were explored using different modalities later. The results showed that sodium alginate grafted by diphenylamine (NaAlg-g-DPA) is suitable for adsorbent to removal Co2+ ion. The parameters for the adsorption of Co(II) ions by NaAlg-g-DPA were also determined. It was shown that the samples of NaAlg-g-DPA had given good correlation with Temkins isotherm model and their kinetics followed pseudo-second-order model. It was also observed that the adsorption capacity seemed to be dependent on pH value in solution which showed better results at basic pH. The findings from this research show that NaAlg-g-DPA has capability to remove Co (II) from aqueous solutions.

Changing the Landscape: An Introduction to the Agricultural and Food Chemistry Technical Program at the 258th American Chemical Society National Meeting in San Diego.

This special issue of the Journal of Agricultural and Food Chemistry (JAFC) is a highlight of the Agricultural and Food Chemistry Division (AGFD) technical program at the 258th National Meeting of the American Chemical Society (ACS) in San Diego, CA, U.S.A., on August 25-29, 2019. At the conference, AGFD had 44 oral sessions at 19 symposia and 100 poster presentations with more than 400 abstract submissions. The technical program covered a broad range of current research and development topics in agricultural and food chemistry, including bioactive food components, diet and human nutrition, utilization of agricultural materials in food systems, food packaging, nanotechnology, and food safety, as well as several special award symposia. This is the first JAFC special issue that highlights an ACS national meeting program with joint efforts from AGFD.

Molecular topology and QSAR multi-target analysis to boost the in silico research for fungicides in agricultural chemistry.

The aim of the present study is to show how molecular topology can be a powerful in silico tool for the prediction of the fungicidal activity of several diphenylamine derivatives against three fungal species (cucumber downy mildew, rice blast and cucumber gray mold). A multi-target QSAR model was developed, and two strategies were followed. First is the construction of a virtual library of molecules using DesMol2 program and a subsequent selection of potential active ones. Second is the selection of molecules from the literature on the basis of molecular scaffolds. More than 700 diphenylamine derivatives designed and other 60 fluazinam's derivatives with structural similarity higher than 80% were studied. Almost twenty percent of the molecules analyzed show potential activity against the three fungal species.

Synthesis and characterization of cellulose nanocrystals derived from walnut shell agricultural residues.

Cellulose nanocrystals (CNCs) have novel and diversified applications in different fields including packaging and nanodelivery systems. This study was dedicated to fabricate CNCs from walnut shell as an abundant source of agricultural byproducts using alkali/acidic hydrolysis method. Moreover, homogenizer and ultrasound devices were applied to produce the CNCs with minimum hazardous solvents in the preparation steps. The physicochemical characteristics of CNCs, such as color, size, yield, and swelling capacity plus their characterization using X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FTIR) were studied. The mean equivalent spherical diameter of the fabricated CNCs was about 130 nm and the production efficiency was 91.5%. Besides, the swelling capacity of CNCs was 1.5-fold of cellulose with a swelling of 400%. The crystallinity degree of the cellulose obtained from walnut shell was 49%, which was improved following acidic and alkali hydrolysis (60%). TGA analysis revealed that the thermal stability of the CNCs was lower than cellulose; moreover, the FTIR results demonstrated that there is not a considerable difference between normal cellulose and CNCs. Overall, it was concluded that walnut shell-derived CNCs have the potential to be employed as promising nanocarriers in different sectors, especially in the food and drug delivery sectors.

Designing cross-linked xylanase aggregates for bioconversion of agroindustrial waste biomass towards potential production of nutraceuticals.

Immobilized biocatalysts design has the potential to efficiently produce valuable bioproducts from lignocellulosic biomass. Among them, the carrier-free immobilization through the cross-linked enzyme aggregates technology is a simple and low-cost alternative. A two steps statistical approach was utilized to evaluate the synthesis of a cross-linked enzyme aggregate from a xylanolytic preparation, which was produced by Cohnella sp. AR92 grown in a peptone-based culture medium. The resulting immobilized biocatalyst, Xyl-CLEA, was significate more stable (25 to 45%) towards temperatures up to 50°C with respect to the free enzyme, and retained over 50% of its initial activity after 5 consecutive cycles of reuse. By means of infrared spectroscopy and electron microscopy, the Xyl-CLEA showed architectural features described as signature of type I and type II of protein aggregates. These, were the result of the simultaneous aggregation of a multiplicity of proteins from the crude enzymatic extract. The enzymatic activity was assessed using alkali pretreated sugar cane bagasse as substrate. Whereas the free enzymatic preparation released xylose as the main product, the immobilized xylanase produced xylooligosaccharides, thus showing that the immobilization procedure modified the potential application of the extracellular xylanase from Conhella sp. AR92.

Latest generation of halogen-containing pesticides.

Agriculture is confronted with enormous challenges, from production of enough high-quality food to water use, environmental impacts and issues combined with a continually growing world population. Modern agricultural chemistry has to support farmers by providing innovative agrichemicals, used in applied agriculture. In this context, the introduction of halogen atoms into an active ingredient is still an important tool to modulate the properties of new crop protection compounds. Since 2010, around 96% of the launched products (herbicides, fungicides, insecticides/acaricides and nematicides) contain halogen atoms. The launched nematicides contain the largest number of halogen atoms, followed by insecticides/acaricides, herbicides and fungicides. In this context, fungicides and herbicides contain in most cases fluorine atoms, whereas nematicides and insecticides contain in most cases 'mixed' halogen atoms, for example chlorine and fluorine. This review gives an overview of the latest generation of halogen-containing pesticides launched over the past 6 years and describes current halogen-containing development candidates. © 2017 Society of Chemical Industry.

Sulfonimidamides in Medicinal and Agricultural Chemistry.

The synthesis and evaluation of structural analogues and isosteres are of central importance in medicinal and agricultural chemistry. The sulfonamide functional group represents one of the most important amide isosteres in contemporary drug design, and about 500 such compounds have overcome both the pharmacological and regulatory hurdles that precede studies in humans. The mono aza analogues of sulfonamides, that is, sulfonimidamides, are rapidly gaining popularity as a novel functional group among synthetic chemists involved in the design of biologically active compounds for both pharmaceutical and agrochemical applications. Herein, we review these recent developments to showcase the promise of this functional group.

Biocatalysis - Key Technology to Meet Global Challenges CCBIO Symposium at the 8(th) Waedenswil Day of Life Science.

In a world of dwindling fossil-based energy, global air pollution and warming, biocatalysis may be a perfect problem-solver. It has the potential to procure sustainable raw materials and energy from biomass, and enables chiral and highly functionalized compounds to be produced ecologically for the chemical and pharmaceutical industry. At ZHAW Waedenswil on June 20, 2016, the Competence Center for Biocatalysis (CCBIO) gave European experts the opportunity to present the latest findings from science, research and practice in the future-oriented field of biocatalysis.

Progress of modern agricultural chemistry and future prospects.

Agriculture is facing an enormous challenge: it must ensure that enough high-quality food is available to meet the needs of a continually growing population. Current and future agronomic production of food, feed, fuel and fibre requires innovative solutions for existing and future challenges, such as climate change, resistance to pests, increased regulatory demands, renewable raw materials or requirements resulting from food chain partnerships. Modern agricultural chemistry has to support farmers to manage these tasks. Today, the so-called 'side effects' of agrochemicals regarding yield and quality are gaining more importance. Agrochemical companies with a strong research and development focus will have the opportunity to shape the future of agriculture by delivering innovative integrated solutions. This review gives a comprehensive overview of the innovative products launched over the past 10 years and describes the progress of modern agricultural chemistry and its future prospects.

Efficient Approach To Discover Novel Agrochemical Candidates: Intermediate Derivatization Method.

Intensive competition of intellectual property, easy development of agrochemical resistance, and stricter regulations of environmental concerns make the successful rate for agrochemical discovery extremely lower using traditional agrochemical discovery methods. Therefore, there is an urgent need to find a novel approach to guide agrochemical discovery with high efficiency to quickly keep pace with the changing market. On the basis of these situations, here we summarize the intermediate derivatization method (IDM) between conventional methods in agrochemicals and novel ones in pharmaceuticals. This method is relatively efficient with short time in discovery phase, reduced cost, especially good innovated structure, and better performance. In this paper, we summarize and illustrate "what is the IDM" and "why to use" and "how to use" it to accelerate the discovery of new biologically active molecules, focusing on agrochemicals. Furthermore, we display several research projects in our novel agrochemical discovery programs with improved success rate under guidance of this strategy in recent years.

A Review of Aquaculture Practices and Their Impacts on Chemical Food Safety from a Regulatory Perspective.

Aquaculture is currently one of the most rapidly growing food production industries in the world. The increasing global importance for this industry stems primarily from the fact that it is reducing the gap between the supply and demand for fish products. Commercial aquaculture contributes significantly to the economies of many countries since high-value fish species are a major source of foreign exchange. This review looks at the aquaculture industry, the issues raised by the production of fish through aquaculture for food security, the sustainability of the practice to agriculture, what the future holds for the industry in the next 10-20 years, and why there is a need to have available analytical procedures to regulate the safe use of chemicals and veterinary drugs in aquaculture.

Review: Application of High Resolution Mass Spectrometry to Monitor Veterinary Drug Residues in Aquacultured Products.

High resolution MS (HRMS) instruments provide accurate mass measurements. With HRMS, virtually an unlimited number of compounds can be analyzed simultaneously because full-scan data are collected, rather than preselected ion transitions corresponding to specific compounds. This enables the development of methods that can monitor for a wide scope of residues and contaminants in aquacultured fish and shellfish including antibiotics, metabolites, and emerging contaminants. Applications of HRMS to the analysis of veterinary drug residues in aquacultured products are summarized in this review including methods for screening, quantifying, and identifying drug residues in these matrixes. The use of targeted, semi-targeted, and nontargeted analysis of HRMS data and the implications to the global aquaculture industry are also reviewed.

Controlled-release fertilizer prepared using a biodegradable aliphatic copolyester of poly(butylene succinate) and dimerized fatty acid.

The preparation and characterization of a controlled-release multicomponent (NPK) fertilizer with the coating layer consisting of a biodegradable copolymer of poly(butylene succinate) and a butylene ester of dilinoleic acid (PBS/DLA) is reported. The morphology and structure of the resulting polymer-coated materials and the thickness of the covering layers were examined using X-ray diffraction and scanning electron microscopy coupled with energy dispersive X-ray analysis. The mechanical properties of these materials were determined with a strength-testing machine. Nutrient release was measured in water using spectrophotometry, potentiometry, and conductivity methods. The results of the nutrient release experiments from these polymer-coated materials were compared with the requirements for controlled-release fertilizers. A conceptual model is presented describing the mechanism of nutrient release from the materials prepared in this study. This model is based on the concentrations of mineral components inside the water-penetrated fertilizer granules, the diffusion properties of the nutrients in water, and a diffusion coefficient through the polymer layer. The experimental kinetic data on nutrient release were interpreted using the sigmoidal model equation developed in this study.